How is it used?
Pleural fluid analysis is used to help diagnose the cause of
inflammation of the
pleura (pleuritis) and/or accumulation of fluid in the pleural space (pleural
effusion). There are two main reasons for fluid accumulation, and an initial set of tests (albumin, cell count and appearance of the fluid) is used to differentiate between the two types of fluid that may be produced:
- An imbalance between the pressure within blood vessels (which drives fluid out of the blood vessel) and the amount of protein in blood (which keeps fluid in the blood vessel) can result in accumulation of fluid (called a transudate). Transudates are most often caused by cirrhosis or congestive heart failure. If the fluid is determined to be a transudate, then usually no more tests on the fluid are necessary.
- Injury or inflammation of the pleurae may cause abnormal collection of fluid (called an exudate). Exudates are associated with a variety of conditions and diseases, and several tests, in addition to the initial ones performed, may be used to help diagnose the specific condition including:
- Infectious diseases – caused by viruses, bacteria, or fungi. Infections may originate in the pleurae or spread there from other places in the body. For example, pleuritis and pleural effusion may occur along with or following pneumonia.
- Bleeding – bleeding disorders, pulmonary embolism, or trauma can lead to blood in the pleural fluid.
- Inflammatory conditions – such as lung diseases, chronic lung inflammation due to prolonged exposure to large amounts of asbestos (asbestosis), sarcoidosis, or autoimmune disorders such as rheumatoid arthritis and systemic lupus erythematosus.
- Cancer – such as lymphoma, mesothelioma, or metastatic cancer.
- Other conditions – idiopathic, cardiac bypass surgery, heart or lung transplantation, or pancreatitis.
^ Back to top
When is it ordered?
Pleural fluid analysis may be ordered when a doctor suspects that a patient has a condition or disease that is causing pleuritis and/or pleural
effusion. It may be ordered when a patient has some combination of the following
signs and
symptoms:
- Chest pain that worsens with deep breathing
- Coughing
- Difficulty breathing, shortness of breath
- Fever, chills
- Fatigue
- Pleural effusion may not cause any symptoms
^ Back to top
What does the test result mean?
An initial set of tests performed on a sample of pleural fluid helps determine whether the fluid is a
transudate or
exudate:
Transudate:
- Physical characteristics—fluid appears clear
- Protein or albumin level—decreased
- Cell count—few cells are counted
Transudates usually require no further testing. They are most often caused by either cirrhosis or congestive heart failure.
Exudate:
- Physical characteristics—fluid may appear cloudy
- Protein or albumin level—higher than normal
- Cell count—increased
Exudates can be caused by a variety of conditions and diseases and usually require further testing to aid in the diagnosis. Exudates may be caused by, for example, infections, trauma, various cancers, or pancreatitis. The following is a list of additional tests that the doctor may order depending on the suspected cause:
Physical characteristics – the normal appearance of a sample of pleural fluid is usually light yellow and clear. Abnormal results may give clues to the conditions or diseases present and may include:
- Milky appearance may point to lymphatic system involvement.
- Reddish pleural fluid may indicate the presence of blood.
- Cloudy thick pleural fluid may indicate the presence of microorganisms and/or white blood cells.
Chemical tests – tests that may be performed in addition to protein or albumin may include:
- Glucose—typically about the same as blood glucose levels. May be lower with infection and rheumatoid arthritis.
- Lactate levels can increase with infectious pleuritis, either bacterial or tuberculosis.
- Amylase levels may increase with pancreatitis, esophageal rupture, or malignancy.
- Triglyceride levels may be increased with lymphatic system involvement.
- Tumor markers may be increased with some cancers.
Microscopic examination – Normal pleural fluid has small numbers of white blood cells (WBCs) but no red blood cells (RBCs) or microorganisms. Laboratories may examine the pleural fluid and/or use a special centrifuge (cytocentrifuge) to concentrate the fluid’s cells on a slide. The slide is treated with a special stain and evaluated for the different kinds of cells that may be present.
- Total cell counts—the WBCs and RBCs in the sample are counted. Increased WBCs may be seen with infections and other causes of pleuritis. Increased RBCs may suggest trauma, malignancy, or pulmonary infarction.
- WBC differential—determination of percentages of different types of WBCs. An increased number of neutrophils may be seen with bacterial infections. An increased number of lymphocytes may be seen with cancers and tuberculosis.
- Cytology – a cytocentrifuged sample is treated with a special stain and examined under a microscope for abnormal cells. This is often done when a mesothelioma or metastatic cancer is suspected. The presence of certain abnormal cells, such as tumor cells or immature blood cells, can indicate what type of cancer is involved.
Infectious disease tests – these tests may be performed to look for microorganisms if infection is suspected:
- Gram stain – for direct observation of bacteria or fungi under a microscope. There should be no organisms present in pleural fluid.
- Bacterial culture and susceptibility testing is ordered to detect any microorganisms that may be present in the pleural fluid. If bacteria are present, susceptibility testing can be performed to guide antimicrobial therapy. If there are no microorganisms present, it does not rule out an infection; they may be present in small numbers or their growth may be inhibited because of prior antibiotic therapy.
Other tests for infectious diseases that are less commonly ordered may include tests for viruses, mycobacteria (AFB smear and culture), and parasites.
^ Back to top
Is there anything else I should know?
^ Back to top